Janizary
Geth Prime
Forum Supporter
2019 Supporter
2020 Supporter
2022 Supporter
2023 Supporter
2024 Supporter
2025 Supporter
Trading Post Subscriber
1 - Pics (See below)
2 - Price: $35ea
3 - Location (Henderson)
In Henderson. Meet at GVR, RC Willey/WinCo, Sportsman's Henderson (I'll travel further for multiples). Not really looking for trades at the moment but would consider partial trade for one or more of the 223/556 ammo types listed in my other thread.
"I'll take it" rules apply and override PMs in process. My usual disclaimer: Weekday availability M-Th is terrible (~530P-730P, or 'lunch' meets near me). Fri/Sat/Sun 'most' daylight hours (events creep in so availability changes).
_____________________________________________________________________
_____________________________________________________________________
BCM/Vltor Gunfighter Charging Handles - MOD3/4/5 - Used - $35ea
Currently Available:
These are the original (updated) BCM Gunfighter MODx charging handles made for BCM by VLTOR (and now sold by VLTOR separately). If you've used them you are familiar with the construction and ease of use. MOD4 and MOD3 are easily operated with single-side only engagement or even the blade of the hand.
https://www.vltor.com/shop/ar/charging-handles/vltor-556-charging-handle/
From the manufacturer:
After a years-long stint in legal and logistical purgatory, the best-selling charging handle of the past decade has made its return. Previously licensed and distributed by BCM as the original GUNFIGHTER™ Charging Handle, VLTOR’s patented design is back on the market. It’s the same exact charging handle design you’ve known and loved since 2009, simply re-released under strictly our own moniker.
The VLTOR Charging Handle is a patented design that redirects the force off of the latch’s roll pin and into the body of the charging handle, which is especially crucial during support hand only manipulations. This design makes the charging handle stronger and less prone to roll pin or latch breakage. The VLTOR Charging Handle design has proven itself over the last decade, both domestically and abroad.
FEATURES:
-VLTOR patented design
-Made from high-strength forged 7075 T6 aluminum
-Mil-Spec Type III Class 2 hardcoat anodizing
-Increased strength, smooth operation
Updated pics of 5 4 remaining with RTV seal installed:
Close up sample of one for seal install:
2 - Price: $35ea
3 - Location (Henderson)
In Henderson. Meet at GVR, RC Willey/WinCo, Sportsman's Henderson (I'll travel further for multiples). Not really looking for trades at the moment but would consider partial trade for one or more of the 223/556 ammo types listed in my other thread.
"I'll take it" rules apply and override PMs in process. My usual disclaimer: Weekday availability M-Th is terrible (~530P-730P, or 'lunch' meets near me). Fri/Sat/Sun 'most' daylight hours (events creep in so availability changes).
_____________________________________________________________________
_____________________________________________________________________
BCM/Vltor Gunfighter Charging Handles - MOD3/4/5 - Used - $35ea
Currently Available:
- 5 4 of original 16 MOD 4 Medium latch remaining - Based on input from initial batch of sales I have added the 'gas buster' gasket seal to all remaining items (90% of folks either got one with the gas buster seal or asked for it to be added to theirs)
- 2 0 x MOD3 Large latch
- 1 0 x MOD5 Small latch
These are the original (updated) BCM Gunfighter MODx charging handles made for BCM by VLTOR (and now sold by VLTOR separately). If you've used them you are familiar with the construction and ease of use. MOD4 and MOD3 are easily operated with single-side only engagement or even the blade of the hand.
https://www.vltor.com/shop/ar/charging-handles/vltor-556-charging-handle/
From the manufacturer:
After a years-long stint in legal and logistical purgatory, the best-selling charging handle of the past decade has made its return. Previously licensed and distributed by BCM as the original GUNFIGHTER™ Charging Handle, VLTOR’s patented design is back on the market. It’s the same exact charging handle design you’ve known and loved since 2009, simply re-released under strictly our own moniker.
The VLTOR Charging Handle is a patented design that redirects the force off of the latch’s roll pin and into the body of the charging handle, which is especially crucial during support hand only manipulations. This design makes the charging handle stronger and less prone to roll pin or latch breakage. The VLTOR Charging Handle design has proven itself over the last decade, both domestically and abroad.
FEATURES:
-VLTOR patented design
-Made from high-strength forged 7075 T6 aluminum
-Mil-Spec Type III Class 2 hardcoat anodizing
-Increased strength, smooth operation
Updated pics of 5 4 remaining with RTV seal installed:
Close up sample of one for seal install:
Last edited:
. If you want one I can make one, but be advised it takes 36+ hours to properly cure once formed.